Kitchenaid Washer Repair Services

KitchenAid is an American home appliance brand owned by Whirlpool Corporation. The company was started in 1919 by The Hobart Manufacturing Company to produce stand mixers; the “H-5” was the first model introduced.

Kitchenaid Washer Troubleshooting and Problems

Washer Does Not Drain or Spin

If you find your KitchenAid washing machine is not draining the water or entering a spin cycle, check that the washer lid is securely closed. The machine will automatically turn off if the lid is opened during operation and will not restart until the lid is closed and the “Start” button is pressed.

Next, check that the drain hose is not clogged. To check the drain hose, unplug the machine, and remove the drain hose from the back of the washer. Clear out any obstruction, and place the hose back on the machine. Plug the washer into the power outlet, and restart the machine to check if the problem has been fixed.

Finally, make sure the drainage hose is no more than 96 inches above the floor. The water will have problems draining if it is too far above the floor. Make any needed adjustments before using the washing machine again.

Cycle is Stuck Filling or Draining

KitchenAid washing machines may seem as if they are stuck in a continuous cycle, where the water continues to fill up or drain from the machine. When this happens, check that the top of the drain hose is sitting above the water level in the machine. If the drain hose sits below the water level, the washing machine will stick in a loop. Make the adjustment to the drainage hose as needed.

Another cause of stuck cycles is the drain hose attachment to the standpipe. The hose should fit securely on the standpipe but not tight. A gap is needed for air flow to help the drainage process. Remove anything used to seal the hose, such as tape, and allow the hose to sit loosely on the standpipe.

Wrong Wash Temperature

A common mistake made when installing KitchenAid washing machines is to mix up the hot and cold water inlet hoses. If the wash temperature is hot when you set it to cold, or vice versa, the water inlet hoses were switched. Unplug the washing machine, turn off the water supply and switch the hoses before using the machine again.

If you run loads of laundry through the machine back to back, you may drain the hot water heater in your home. This is normal and can be prevented by waiting a short period of time for the hot water supply to replenish.

Kitchenaid Washer Experts

Calling an expert technicians from Super Appliance is the smart choice to make. Not only do we charge by the job instead of by the hour, we provide an accurate quote before we begin any work. Our technicians have extensive experience in repairing all brand, including Admiral, Amana, Bosch, and more! See the complete list of appliance brands we repair or read on for additional info. Call us to fixed your appliance problem.

Why Choose SuperAppliance

Professional, Quality & Instant Service

Fully Bonded, Insured & Licensed

Professional Service by Factory Trained Technician

Affordable Price & Upfront Pricing Idea

Same Day Service & Flexible Schedule

100% Satisfaction Guarantee

Brand we repair